Drive-In Pallet Rack Systems in Baltimore, MD

Name: Baltimore Pallet Rack
Address: Baltimore, MD, US
Telephone: (240) 290-6544
Price range: $$

Quality drive-in pallet rack supplied and installed by Baltimore's trusted warehouse solutions team.

Drive-in pallet rack system in a Baltimore Maryland cold storage warehouse

Ready to get started? Get a free, no-obligation quote today.

Maximum-density LIFO storage — forklift drives into the rack, pallets rest on continuous side rails, 2 to 10+ deep.

About Drive-In Pallet Rack

Drive-in pallet rack is the highest-density pallet storage system outside of full automation. The forklift drives into the rack structure between heavy structural columns, traveling on floor-level wheel paths, and places pallets on continuous side rails that run the full depth of the lane. Pallets are stored 2 to 10+ deep, stacked 3 to 5 high, with every cubic foot inside the rack footprint converted to storage. The tradeoff is real — drive-in runs LIFO only, rack-damage exposure is the highest of any rack type because forklifts physically enter the structure, and every bay typically holds a single SKU. But for Baltimore operators with homogeneous, bulk, lower-selectivity inventory — especially cold storage freezers along the I-95 Jessup–Halethorpe corridor and seasonal peak staging at the regional retail DCs — drive-in delivers the lowest capital cost per pallet position of any serious rack system. Baltimore Pallet Rack engineers drive-in installs for Maryland wind loads (ASCE 7, 115 to 120 mph 3-second gust along the bay) and anchors to IBC 2021 with Maryland amendments and RMI ANSI MH16.1-2023, with column-protector packages specified on every install to keep rack repair costs controllable over time.

How Drive-In Pallet Rack Works

The mechanics behind the system — and why they matter for your operation.

Heavy structural uprights

Vertical columns are set on a deep grid — wider than selective rack — and every load is transferred directly to these columns. There are no beams; uprights carry all vertical and lateral loads.

Continuous side rails

Instead of beams spanning front-to-back, drive-in uses horizontal side rails that run the full lane depth along the inside of each column line. Pallets rest on these rails at every level.

Forklift enters the rack

A lift truck drives directly into the lane, between column lines, to place or retrieve a pallet. Loading starts at the back of the lane and fills forward; retrieval picks from the front.

LIFO per lane

Because every pallet sits on the same continuous rail and loading and picking happen from the same aisle, the last pallet loaded is the first one picked. Drive-through configurations with opposing aisles enable limited FIFO where operationally justified.

When to Choose Drive-In Pallet Rack

• You need maximum density and LIFO rotation is acceptable
• A bay will hold a single SKU (or very few SKUs) at a time
• Cold storage or freezer operations where cube utilization is the dominant cost lever
• Seasonal or peak-period inventory staging where selectivity matters less than capacity
• You already operate reach trucks or narrow-aisle fleet, or will invest to run them

When Not to Choose

• You need FIFO — go with pallet flow instead
• SKU count per bay is high — selective is the right call
• Your operation cannot tolerate rack-damage repair cycles — consider pushback
• Your forklift fleet is all counterbalance and you do not want to change that

Specifications at a Glance

Lane depth: 2 to 10+ pallets deep
Pallet capacity: Up to 2,500 lbs per position (rail-supported); structural options higher
Rotation: LIFO (drive-in); FIFO possible with drive-through
Load support: Continuous side rails running full lane depth (no beams)
Upright construction: Heavy structural steel — columns carry all load
Forklift required: Reach, narrow-aisle, or sit-down — enters rack structure
Column protectors: Standard on every install — non-negotiable for damage control
Height configuration: 3 to 5 pallets high typical; taller with engineering review
Code compliance: IBC 2021 (Maryland amendments), RMI ANSI MH16.1-2023
Baltimore seismic / wind: SDC A–B, wind per ASCE 7 (115–120 mph 3-sec gust); lateral loading governs anchoring

Drive-In vs. Other High-Density Options

Attribute	Selective	Pushback	Drive-In	Pallet Flow
SKU selectivity	100%	Medium (per lane)	Low (per bay)	Low (per lane)
Rotation	Any (FIFO or LIFO)	LIFO	LIFO	FIFO (automatic)
Lane depth	1 pallet	2–6 pallets	2–10+ pallets	2–20 pallets
Forklift enters rack	No	No	Yes	No
Rack-damage exposure	Low	Low	High	Low
Density vs. selective	1.0×	1.8–2.0×	2.0–2.5×	2.5–3.0×
Forklift type needed	Standard	Standard	Reach / narrow-aisle	Standard
Relative cost per position	$	$$	$$$	$$$$

Where Drive-In Pallet Rack Fits in the Baltimore Metro

Specific industries across Baltimore and Maryland where this system pays off.

Cold storage freezer — Jessup, Halethorpe, Beltsville

Americold Jessup, Lineage Logistics, and Preferred Freezer Services use drive-in for bulk homogeneous SKU freezer storage where every square foot of floor space costs significant refrigeration energy. Drive-in compresses footprint harder than pushback and pays back in utility bills within the first few years.

Paper & pulp — Baltimore, Hagerstown, Havre de Grace

WestRock, Domtar, and paper roll distribution operations around the Port of Baltimore and Hagerstown corridor use drive-in for bulk roll stock and corrugated bundles where SKUs are homogeneous and pick frequency per bay is low.

Spice & food manufacturing — Hunt Valley, Locust Point

McCormick & Company (Hunt Valley) and Domino Sugar (Locust Point) use drive-in in peak-staging zones for finished product where a bay holds single-SKU bulk outbound lots for extended dwell before shipping.

Seasonal retailer DC — Frederick, Rocky Point, Baltimore

Home Depot RDC (Frederick), Lowe's regional DC operations, and TJX regional use drive-in for seasonal SKU peak staging — holiday product, patio furniture in spring, heating equipment in fall — where a SKU is in and out in a defined window and density beats selectivity.

Beverage bulk pre-ship — Halethorpe, Rosedale, Capitol Heights

Reliable Churchill and regional Coca-Cola pre-shipment bulk staging uses drive-in in zones where pallet rotation is controlled by shipping lane rather than FIFO code-date logic — letting the DC extract maximum cube from the footprint.

Product Features

Lane depths from 2 to 10+ pallets, heights typically 3–5 pallets high
Heavy structural steel columns — all load transfers through uprights
Continuous side rails running full lane depth (no beams to bow or fail)
Column-protector packages standard on every Baltimore installation
Drive-through configurations engineered for limited-FIFO operations
Compatible with reach, narrow-aisle, and sit-down forklift fleets
Engineered to IBC 2021 (Maryland amendments) and RMI ANSI MH16.1-2023

Benefits for Your Business

Lowest capital cost per pallet position of any major rack type

Maximum cube utilization — critical in cold storage and high-rent markets

Simple construction — few moving parts, low ongoing maintenance

Scales with inventory seasonality — great for peak-period bulk storage

Frequently Asked Questions

Real answers for buyers researching drive-in pallet rack in the Baltimore metro area.

How is drive-in different from drive-through?

Drive-in has a single aisle where forklifts enter and exit, which forces LIFO rotation. Drive-through has aisles on both ends of every lane, letting forklifts load from one side and pick from the other to achieve limited FIFO. Drive-through costs more (extra aisle space, more columns) but gives rotation flexibility — uncommon but used in some Baltimore-area food and pharma applications.

What kind of forklift do I need for drive-in?

Most Baltimore drive-in installs run reach trucks or narrow-aisle trucks because the forklift has to maneuver between columns inside the rack. Sit-down counterbalance can work in wider-aisle designs but gives up some density. If your fleet is all counterbalance and you want density without fleet changes, pushback is usually the better choice.

Why is rack damage such a concern with drive-in?

Because forklifts physically enter the rack structure, every in-and-out cycle is a potential impact on a column or side rail. A distracted operator clipping an upright can total a column section and bring down pallets. Every serious Baltimore drive-in install includes column-protector guards on the full column base, and most operations budget ongoing rack repair as a line item.

How does drive-in compare to pushback?

Both are LIFO and both gain density over selective. Drive-in goes deeper (2–10+ vs. 2–6 pallets) and costs less per position, but forklifts enter the rack so damage exposure is higher and you typically need reach or narrow-aisle trucks. Pushback keeps forklifts in the aisle, works with standard counterbalance, but costs more and caps out at about 6 deep. The tradeoff is density and cost vs. damage control and fleet flexibility.

What SKU mix makes drive-in the right answer?

Drive-in pays back when a single bay holds a single SKU (or very few SKUs) for extended periods. If you have 20 pallets of one SKU sitting for 2 to 8 weeks before shipping — perfect fit. If every bay needs to hold 3–5 unique SKUs and inventory cycles daily, drive-in is the wrong choice and selective or pushback wins.

Can drive-in be used in a freezer?

Yes — and freezers are one of the most common drive-in applications in the Baltimore cold-storage corridor (Jessup, Halethorpe, Beltsville). Drive-in lets the operator compress the refrigerated footprint, which directly cuts energy cost because refrigeration load scales with cubic footage. That density-to-energy math is often what makes drive-in pencil out in cold storage even when pushback would work operationally.

Related Services

We don't just supply — we design, install, inspect, and maintain.

Pallet Racking Installation Rack Inspection & Repair Engineering & Permitting Project & Installation Management

Get a Free Quote

Request Free Quote (240) 290-6544

Free, no-obligation quotes

Professional installation available

Licensed & fully insured

Serving all Baltimore metro areas

Other Products

Ready to Optimize Your Warehouse?

Get a free estimate from Baltimore's most trusted pallet racking company. We serve warehouses of all sizes throughout the Baltimore, MD metro area.

Get Free Estimate (240) 290-6544

Free Estimates OSHA Compliant Licensed & Insured Fast Response